Hexin-technology HXSP-1002A 2-Port RS-232 to Ethernet Serial Device Bedienungsanleitung

HXSP-10022 ports RS-232 or RS-485/422 serial device serveruser manual

【Application】NP322 application sketch map:Working mode:1. Based on Virtual COM port2. Based on WinSock accessPlease note that if PC in Client (Server)

【Summary】HXSP-1002 is a serial device server which can contact with network fast. Itprovides one lineRS-232/485/422 (RS-232: DB9M: RS-484/422 / 4 bits

EIA RS-232, RS-485, RS-422 standardNO.of ports: 2 RS-232 or RS-485/RS-422 (RJ45) port optionalRS-232 signal: TxD, RXD, RTS, CTS, DTR, DSR, DCD, GNDRS-

pinMDI signalMDI-X signal1TX+RX+2TX-RX-3RX+TX+6RX-TX-4, 5, 7, 8——【LED indicator】Power supply input: ATC bright all alongSerial 1 connected: Port1 on b

RS-232RS-485RS-4221TXDD+RX+2RXDD-TX+3RTSRX-4CTSTX-5DSRFULL6GNDGNDGND7DTR8DCD【Software installation and setting】1 Set the IP address of the deviceThe I

2. Click “OK”, setting the IP of device by telnet. Choose the menu by↑↓←→of thekeyboard and quit by “ESC” key.3 Choose the “Server” menu and push “Ent

6 Push “Enter” Key, save the setting.2. Create the Virtual COM port on the PCSetup the “setup_nt_2K.exe” software, then you will find the “COM port ov

virtual COM port as follows:1 Input the IP of the device2 Input the NO. of the port of the device(Inpu t 1~8)3 Input 3004 Default the parameterClick t

Other Virtual COM port setting the sa me as COM5Note: Pay attention to the questions as below:(1) Please make sure that the power adapter is 5VDC(2) W