HXSP-10088 portsRS-232 or RS-485/422 serial device serveruser manual
【Summary】8 ports serial device servers which can contact with network fast. itprovides one line RS-232/485/422 (RS-232: DB9M: RS-484/422 / 4 bits term
Transmit distance: 100mInterface protection: 1.5KV ESDInterface type: RJ-45Serial interfaceEIA RS-232, RS-485, RS-422 standardRS-232 signal: TxD, RXD,
pinMDI signalMDI-X signal1TX+RX+2TX-RX-3RX+TX+6RX-TX-4, 5, 7, 8——to 8 ports RS-485/422, the appearance is the same. The PIN define of the Ethernet por
PIN12345678RS-232TXDRXDRTSCTSDSRSGDTRDCDRS-485D+D-GNDRS-422RX+TX+RX-TX-FULLGNDRS-232/485/422 interface【Software installation and setting】1 Set the IP
2. Click “OK”, setting the IP of device by telnet. Choose the menu by↑↓←→of thekeyboard and quit by “ESC” key.3 Choose the “Server” menu and push “Ent
6 Push “Enter” Key, save the setting.2. Create the Virtual COM port on the PCSetup the “setup_nt_2K.exe” software, then you will find the “COM port ov
1 Input the IP of the device2 Input the NO. of the port of the device(Input 1~8)3 Input 3004 Default the parameterClick the “OK”, Click “Save”. COM5 h
(1) Please make sure that the power adapter is 5VDC(2) When connect to PC, use cross-over cable.(3) When connect to HUB or Switch, use straight-throug
Kommentare zu diesen Handbüchern