Hexin-technology HXSP-1001 RS-232/RS-485/RS-422 to Ethernet TCP/IP Bedienungsanleitung Seite 1

HXSP-1001 RS-232/485/422 serial device server user manual

【Summarize】 HXSP-1001 is a serial device server which can connect with network fast. it provides one RS-232/485/422 (RS-232: DB9M; RS

Port memory: 512 byte Transmit distance: 100m Interface protection: 1.5KV ESD Interface type: RJ-45 Serial NO.of ports: RS-232,RS-422/485 4 bits termi

pin MDI signal MDI-X signal 1 TX+ RX+ 2 TX- RX- 3 RX+ TX+ 6 RX- TX- 4, 5, 7, 8 — — RJ 45 port support automatic MDI/MDI-X operation. can

Obverse: LED indicator show: Electrify input: Status1and Status2 blinking 3times Main mode undiscover target facility: Status2 blinking, 1 /sec Da

Step 3: Default Item , select the create a new VSP (COM) . Then click “Next” Step 4: Default Item, and then click “Select from

client server mode（2）serve mode（3）free choice mode Step 8: click on “Next”. Step 9: Select the TCP/IP transport protocol su

Continue click the “finish” in the next step. Note: Advance setting steps and methods refer to the user manual document in CD. 【Device Installation】 P

the facility after waiting 20 minutes. MAC address bind：When PC carries on the correspondence with some equipment, If discovered that this equip